3 Side Trimmers
MOHR BC330
PRODUCTION LEVEL : FULL
The sturdy MOHR 3-Side Trimmer, also suitable for networking, is the machine for the automated trimming of perfect-bound or saddle-stitched products. Unlike the three-knife trimmer the MOHR 3-Side Trimmer, according to its name, is equipped with only one knife. A gripper system takes the product to the respective cutting position.
Technical Specification
- Performance [single block] : 220 Books/h
- Performance [multiple block] : 520 Books/h
- Block size untrimmed min : 120 × 152 mm | 4.72 × 5.98 in
- Block size untrimmed max : 305 × 330 mm | 12.01 × 12.99 in
- Block size trimmed min : 105 × 148 mm | 4.13 × 5.83 in
- Block size trimmed max : 297 × 325 mm | 11.69 × 12.80 in
- Top trim min : 2 mm | 0.08 in
- Top trim max : 100 mm | 3.94 in
- Front trim min : 2 mm | 0.08 in
- Front trim max : 100 mm | 3.94 in
- Bottom trim min : 2 mm | 0.08 in
- Bottom trim max : 100 mm | 3.94 in
- Book thickness min : 3 mm | 0.12 in
- Book thickness max : 51 mm | 2.01 in
- Pile height aligning gauge max : 550 mm | 21.65 in
- Pile height unloading max : 550 mm | 21.65 in
- Clamp pressure min : 200 daN | 441 lbs
- Clamp pressure max : 600 daN | 1,323 lbs
- Width : 1,830 mm | 72.05 in
- Length : 2,220 mm | 87.40 in
- Height : 1,650 mm | 64.96 in
- Weight net : 1,200 kg | 2,646 lbs
- Compressed air required (6 - 8 bar) : 380 Liter / Minute
- Electrical power draw (apparent power) : 1.8 kVA
- Thermal output : 6.143 BTU
